Optika Italy Modular Serie Manual De Instrucciones página 6

Installation to desk
1. Adjust the height of the Desk Clamp (2) to suit desktop surface (See Figure 1)
2. Attach the Desk Clamp (2) on to the edge of the desk in the desired position and with the clamp opening fac-
ing towards the edge of desktop (See Figure 2). Tighten by hand to ensure that the Desk Clamp fully clamps
to the desktop surface and is secure (See Figure 3).
3. To position the Collar at your desired height, you will need to loosen the Collar as shown. Tighten by hand
until the Collar is firmly in place (See figure 4)
Figure 2
UP
DOWN
Figure 1
DETAILED VIEW
Figure 4
Page 6
Figure 3
COLLAR