Bayside LAGOON Manual Del Usuario página 5

Lagoon Fan Installation Instructions
•
The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of
the blade to the nearest objects or walls.
•
Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at
least 22kg, with two long screws provided. Ensure at least 30mm of the screw is threaded into the
support.
•
with the 4 long screws provided. Ensure at least 30mm of the screw is threaded into the support.
(Fig. 2)
NOTE: The bracket screws provided are for use with wooden structures only. For structures other
than wood, the appropriate screw type MUST be used. Ensure the screws used are suitable for
the mounting surface and the surrounding environment.
Angled ceiling Installation
This fan hanging system DOES NOT support a degree angled ceiling installation.
4 | P a g e
INSTALLING THE MOUNTING BRACKET
22 KG
Fig. 2
Fig. 2
V1.1-EU (10/2020)