Bayside LAGOON Manual Del Usuario página 6

Lagoon Fan Installation Instructions
Blade attachment (Fig.3)
Secure the blade on the motor by using 3 screws to tighten it, ensuring they are tightened simultaneously.
(Take care not to over tighten as this can damage blades)
Once completed, repeat the process on the remaining blades.
Light kit installation (For fan with light) (Fig.4)
Install the globe (included, Max. 18 W, GX53) in the lamp holder.
Lift the fan assembly to the mounting bracket (1) and let the J-hook (2) of the
•
mounting bracket go through the hole of the hanging canopy (3) and hang up
the fan assembly. Fig. 5
Connect the male and female connector together (4). Fig. 5
•
Fig. 5
5 | P a g e
INSTALLING THE FAN
Fig. 3
HANGING THE FAN
Fig. 4
V1.1-EU (10/2020)