Bayside LUCCI Aria CTC Manual Del Usuario página 11

Aria CTC Installation Instructions
LIGHT CONTROL
: Press the button to turn ON/ OFF the light.
The remote has memory function. If the fan or light is turned off by the isolating switch, it will memorize
and recover the last status when turned on next.
The LED Light Kit has a 3-step dimmable function which is controlled by an ON/OFF switch. Toggle the
switch ON/OFF to the luminaire 4 times within 5 seconds, the globe will light up in the following order:
100% brightness → 60% brightness → 10% brightness → 100% brightness
To switch back to 100% brightness at any stage, turn OFF the luminaire, and then after 5 seconds turn
ON the luminaire, it will reset to 100% brightness.
INSTALLATION OF THE REMOTE CONTROL HOLDER (Fig. 13)
1. Locate a suitable wall or surface to
fix the remote control wall holder.
2. Remove the screw cover and install
the holder using the 2 screws and
re-install the screw cover. (Fig.13a).
3. Slide the remote into the holder.
(Fig. 13b).
REVERSING SWITCH (Fig. 14)
Your ceiling fan can operate in either summer or winter mode.
SUMMER Mode: The reverse switch shall be in the SUMMER position to make the fan rotate in an
anticlockwise direction. The airflow will be directed downwards, for cooling in summer.
WINTER Mode: The reverse switch shall be in the WINTER position to make the fan rotate in a
clockwise direction. The airflow will be directed upwards assisting in the circulation of warm air, for
energy conservation in winter.
10 | P a g e
Fig. 13a
Fig. 14
Fig. 13b
V1.0 EU (2020/10)