Bayside LUCCI Aria CTC Manual Del Usuario página 6

Aria CTC Installation Instructions
• The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of
the blade to the nearest objects or walls.
• Install the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least
24kg, with the 4 long screws provided. Ensure at least 30mm of the screw is threaded into the
support. (Fig. 2)
NOTE: The bracket screws provided are for use with wooden structures only. For structures
other than wood, the appropriate screw type MUST be used. Ensure the screws used are
suitable for the mounting surface and the surrounding environment.
ANGLED CEILING INSTALLATION
This fan hanging system DOES NOT support a degree angled ceiling installation.
•
Install the motor housing (1) onto the motor assembly. (Fig.3)
•
Lift the fan assembly up to the mounting bracket. Hang the fan assembly onto the J-hook (2) of
the mounting bracket. (Fig.4)
•
Complete the electrical wiring according to the 'ELECTRICAL WIRING DIAGRAM' section below.
Fig. 3
5 | P a g e
INSTALLING THE MOUNTING BRACKET
24 KG
HANGING THE FAN TO MOTOR ASSEMBLY
Fig. 2
Fig. 4
V1.0 EU (2020/10)