Steren STV-115 Manual De Instrucciones página 13

IMPORTANT
-Only use the supplied pieces and fasten them tightly.
-Do not forget to use all pieces. Install all pieces as shown on this manual.
-Do not try to modify any piece.
-Take care about the weight of the bracket while mounting in a wall.
-If you mount the bracket in a concrete wall, make sure to use the supplied anchors.
-If you mount the bracket in a wooden wall, it is possible that you need an additional support,
in order to bear the weight of the TV.
-At least two people are needed for installing the bracket.
-Choose a fl at wall, in order to fi x the TV securely.
-Place a cover protection over the working surface, while you manipulate the monitor and
the wall bracket.
-Make sure the wall bracket is securely fi xed to the wall, after the installation.
-Leave at least 15 cm around the unit, and remove all kind of objects.
HIGHLIGHTS
The LED/LCD TV stand has been designed with a double arm to fi t screens between 32 and
50", and can support up to 88 lb.
The TV can be adjusted in almost any direction and the stand is perfect to be installed at
schools, offi ces, hotels, conference rooms and any other wall at home.
Manufactured in low carbon steel fi nished in black paint. All required fi ttings for installation
are included in the package.
Tilt angle: +/- 15°
Maximum load: 88 lb
Plate thickness: 1.3 mm
1.2 ft arm length
3 3