Features
Mixer Release Button
Use this feature to release the mixer
Bowl Rest
™
This feature can be used on most
the edge of the bowl.
Pinch Hazard�
w CAUTION
Bowl Rest when mixer is on.
NOTE: Do not use Bowl Rest on small
(1
⁄
quart [1.4 L]) mixing bowls or
1
2
plastic mixing bowls.
Using Your Mixer
1� Always make sure mixer is unplugged
and OFF ( ) before inserting beaters,
using as a hand mixer or assembling
on the stand.
2� Plug mixer into electrical outlet.
3� Move the speed control to desired
speed, starting at 1 and increasing to
a higher speed as necessary.
4� If using as a stand mixer do not
leave mixer unattended. Always
monitor the progress of the mixing.
5� When finished mixing, move the
speed control to OFF ( ) and unplug
mixer.
from the "locked"
position on the
stand.
large mixing
bowls. Use
the Bowl Rest
while adding
ingredients
or checking a
recipe. To use,
TURN MIXER
OFF ( ) and then
set the mixer on
Never use
QuickBurst
™
Press and hold down the button for
QuickBurst
™
Shift and Stir
™
Use the lever to move the turntable.
Bowl
Lever
6� To eject beaters, push straight down
7� To remove mixer from stand, hold
mixer and press mixer release
button. Pull mixer to release from
stand.
additional power
at any speed.
NOTE: Never use
QuickBurst
for more than
two minutes at
a time or motor
may overheat.
Bowl Lever
This allows you
to position the
beaters near the
edge of the bowl
or in the center
for better mixing
performance.
on the eject
button.
5