Power Supply - Bontempi GE 5871 Libro De Instrucciones

E N G L I S H
EL E C T RO N I C R OC K G U I TA R

POWER SUPPLY

This instrument works with 2 x 1.5V IEC R6/AA batteries (not
supplied) which are inserted in the housing at the bottom.
INSTALLATION OF BATTERIES
Open the battery compartment. Insert batteries.
Re-fit battery cover.
Replace batteries when the quality of sound becomes bad.
Use alkaline batteries to obtain a longer duration.
ATTENTION - BATTERY CARE
Non-rechargeable batteries are NOT to be recharged. • Rechargeable batteries must be removed from
the product before being charged. • Rechargeable batteries are only to be charged under adult super-
vision. • Different types of batteries or new and old batteries are not to be mixed. • Use only batteries
of the same or equivalent type. • Batteries are to be inserted with correct polarity. • Remove exhausted
batteries to prevent leakage. • Do not short circuit supply terminals. • Remove batteries during long
periods of non-use
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below, please refer to Council
Administration office regarding specialised waste collection centres.
1 - DISPOSAL OF BATTERIES - Protect the environment by disposing of batteries in the
special containers provided for this use.
2 - PACKAGING DISPOSAL - Take the paper, cardboard and corrugated board to the appropriate
waste collection centres. Plastic material must be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
01 02 03 05 06 07
PET PE PVC PP PS O
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD • PVC =Polyvinyl
chloride o PP= Polypropylene • PS= Polystyrene, Polystyrene foam • O= Other polymers (ABS,
Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indicates that the product must not be disposed of in the
domestic waste at the end of its useful life. Instead, it should be taken to your nearest desi-
gnated collection point or recycling facility. Alternatively, check with your retailer and return
the product when buying a replacement, on a one-to-one basis or as free of charge in case
the size is smaller than 25 cm. Appropriate disposal promotes the recycling of parts and
materials, as well as helping to protect the environment and human health. Under current legislation,
strict penalties are enforced against those disposing of products illegally. For more information about
the collection of special waste, contact your Local Authority.
2