Power Supply; Switching On/Off - Bontempi 24 1310 Manual Del Usuario

Ocultar thumbs Ver también para 24 1310:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
E N G L I S H

POWER SUPPLY

Use a screwdriver to open the battery compartment. Insert
3 x 1.5 V batteries R6/AA (not supplied), ensuring correct
polarity. Re-fit battery cover. Replace batteries when the
quality of sound becomes bad. Use alkaline batteries to
obtain a longer duration.
ATTENTION - BATTERY CARE:
Non-rechargeable batteries are NOT to be recharged. • Rechargeable batteries must be removed from the
product before being charged. • Rechargeable batteries are only to be charged under adult supervision. •
Different types of batteries or new and old batteries are not to be mixed. • Use only batteries of the same or
equivalent type. • Batteries are to be inserted with correct polarity. • Remove exhausted batteries to prevent
leakage. • Do not short circuit supply terminals. • Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below, please refer to Council
Administration office regarding specialised waste collection centres.
1. DISPOSAL OF BATTERIES: Protect the environment by disposing of batteries in the special
containers provided for this use.
2. PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to the appropriate waste
collection centres. Plastic material must be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD • PVC =Polyvinyl chlo-
ride • PP= Polypropylene • PS= Polystyrene, Polystyrene foam • O= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES: The wheelie bin symbol with a cross indicates that
the product must not be disposed of in the domestic waste at the end of its useful life. Instead, it
should be taken to your nearest designated collection point or recycling facility. Alternatively, check
with your retailer and return the product when buying a replacement, on a one-to-one basis or as
free of charge in case the size is smaller than 25 cm. Appropriate disposal promotes the recycling
of parts and materials, as well as helping to protect the environment and human health. Under current leg-
islation, strict penalties are enforced against those disposing of products illegally. For more information about
the collection of special waste, contact your Local Authority.

SWITCHING ON/OFF

Turn on the instrument by moving the switch
at the back of the instrument, to the ON position.
To switch the instrument off move the same selector
to OFF.
2
01
02
03
PET
PE
PVC
a
,
a
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
05
06
07
PP
PS
O

Publicidad

Tabla de contenido
loading

Tabla de contenido