Heath Zenith SL-307-00 Manual De Instrucciones página 6

9. Once your push button and chime are
wired and functioning correctly, insert
top of push button into top of back and
snap bottom of push button into place
(see Figure 6). Note: The push button
must be mounted with the release tab
facing downward.
Figure 6 - Attach Push Button onto Back
Troubleshooting
If bell or chime does not operate:
• For Electronic Chimes: If tune does
not play completely, reverse wires
connected to the push button.
• Disconnect wires from button and touch
together. If bell or chime operates,
replace with new button.
• Check transformer, bell, or chime.
6 598-1282-03