Controls & Features - Troy-Bilt FLEX 23AAAA8X711 Manual Del Operador

Controls & Features
Attachment Control Lever
Drive Control Lever
WARNING! Read and follow all safety rules and instructions in this manual, including the entire Operation
section, before attempting to operate this machine. Failure to comply with all safety rules and instructions
may result in personal injury.
Engine
Refer to the FLEX™ Base Unit Operator's Manual for details
regarding all engine-related controls and features.
Caster Wheel
The front caster wheels may be locked in a forward position,
or unlocked with the ability to swivel based on the operator's
control of the handle system.
Caster Wheel Lock
The caster lock is located on the top of each front caster wheel.
Grease Fitting
Used to lubricate the caster wheel swivel function.
8
Mulch Plug
Discharge Chute
Attachment Control Lever Lock
Figure 3-1
Deck Lift Lever
Used to control the mowing heighth of the cutting deck.
Mulch Plug
Can be used when the discharge chute or optional bagger
attachment is NOT installed.
Discharge Chute
The discharge chute is located on the right side of the mower
attachment and controls the dispersion of grass clippings.
Drive Control Lever
This lever propels the entire machine forward.
Attachment Control Lever
This lever engages the cutting deck, allowing the blades to spin.
3
Deck Lift Lever
Caster Wheel Lock
Grease Fitting