Operation; Cleaning; Disposal Instructions; Technical Data - Heru VT 55 Instrucciones De Uso

Operation

1. Connect the appliance to a properly in-
stalled wall socket.
2. Switch on the appliance using the but-
tons (10) and select the desired speed
setting.
0 - off
1 - slow
2 - medium
3 - fast
3. For oscillation, press the oscillation
knob (8), which is located on top of the
motor unit (7). To stop oscillation, pull
oscillation knob upwards.
4. The air flow can be adjusted by tilting
the entire motor unit upward or down-
ward until you have reached the de-
sired vertical angle.Fix angle by
tightening with the tilt adjusting screw
(9) below the motor unit.
5. Always unplug the appliance when it is
not used.

Cleaning

Always unplug the appliance
before cleaning.
• Clean the exterior with a soft damp
cloth.
• Do not use any thinners or scouring
agents for cleaning.

Disposal Instructions

Waste electrical devices marked with this
sign must not be disposed of with your
household waste, but – according to the
EU directive on Waste Electric And Elec-
tronic Equipment of 24th March
2005 – are to be collected sep-
arately. Therefore, please re-
turn this device at the end of its
life cycle to special collection
points for disposal.
Your pedestal fan VT 55 is packed in a re-
tail box. Such boxes are recyclable waste,
i.e. they are reusable or recyclable

Technical Data

Voltage
Output
Speed settings
Subject to change without notice.
Version: VT55/01/2011.
-9-
220-240 V ~ 50 Hz
50 W
3
GB