Fitting The Endpanels - SIFA QUAD Manual Para El Uso Y Mantenimiento

GB

2.9 FITTING THE ENDPANELS

- Fit the end panel (Fig. 18, pos. A), fixing the pins into the corresponding holes (Fig. 18, pos. B).
- Put the end side ajar and tighten the M6 TCEI screws (fig. 18 pos. C).
Fig.18
B
A
- Tighten the beads (fig 18b, pos D).
- Connect the glass side panels
the electricity supply and slot them into position
(fig. 19, pos. F).
NOTE! Fit the glass side panels with the
electrified track facing outwards.
Fig.19
E
(fig.19, pos. E) to
F
F
C
Fig.18b
E
45
D
F
F