Description Of The Device; Technical Specifications - therm-ic POWERGLOVES Manual Del Usario

DESCRIPTION OF THE DEVICE

PowerGloves
• Heating level indicator light (1.1)
• One button control pad for 3 heating levels (1.2)
• Battery charging connector (1.4)
• Battery pockets (1.5)
USB charger
• Charge indicator light (2.1)
• Charger cord with plug (2.2)
• USB connector (2.3)
• Optional wall plug universal charger 5V/2A (with
adaptors for use in different countries)

TECHNICAL SPECIFICATIONS

USB charger (spare part available from Therm-ic)
USB charger* Input 5V / 2A
Optional wall
plug universal Input 110V -
charger* 5V / 2A 240V ~
(with adaptors for (50 - 60 Hz) max.
300 mA.
use in different
countries)
«Dual» Lithium
3,7V / 3600 mAh
batteries*
* spare parts available from Therm-ic
FIRST USE AND CHARGING THE BATTERIES
The batteries must be charged before first use.
Please ensure that the Powergloves are switched OFF
while charging.
1. Plug in the USB cable. The charge indicator light
(2.1) will light up green. Next, plug the two gloves
connectors (1.4) into the charger (2.5). Charging
Output 4,2V /
1A x 2
Output 5V /
2000 mA.