IMPORTANT: Installation must be
carried out according to the manu-
facturer's instructions. Incorrect
installation may cause harm and
damage to people, animals or prop-
erty, for which the manufacturer
accepts no responsibility.
Before carrying out any work on the
electrical section of the appliance, it
must be disconnected from the
mains.
Connection to a good earth wiring
system is absolutely essential.
The manufacturer accepts no
responsibility for any inconve-
nience caused by failure to comply
with this rule.
DETAILS
Connection to the electric power sup-
ply must be carried out by a qualified
technician and following the appropri-
ate safety regulations.
Before carrying out the connection to
the power supply, the voltage rating of
the appliance (stamped on the appli-
ance identification plate) must be
checked for correspondence to the
available mains supply voltage, and
the mains electric wiring should be
capable of handling the appliance's
power rating (also indicated on the
identification plate).
The appliance must be connected
directly to the mains supply by means
of a heavy duty omnipolar switch with
3 mm minimum distance between the
contacts.
A double pole switch must be provided
no further than 2 metres from the
appliance to the electrical supply. All
supply current and earth conductors
must be able to withstand an ambient
temperature of 75°C.
for the other countries
After having installed the appliance,
the power switch must always be in a
accessible position.
N.B. For connections to the mains
power supply, never use adaptors,
reductions or multiple power points
as these may overheat and catch fire.
In the event that installation should requi-
re modifications to the mains supply
wiring system, it is recommended that a
qualified technician be called to carry out
substitution.
The technician will also have to verify
that the cross-section of the electric
cables on the power point match the
appliance's power rating.
If the hob surface is cracked discon-
nect the appliance from the mains.
27