Lenco DIR-70 BK Manual De Usuario página 12

Con bluetooth
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Storing Internet radio station presets
Your Radio can store up to 250 Internet radio stations in its preset memories for instant
access to your favourite stations. Presets 1-4 can be stored and quickly recalled using the
one-touch access buttons on the top of your radio.
Note: When you store Internet radio station presets, these are also automatically stored
under the 'My Favourite' option within the Internet radio menu.
Storing the one-touch presets 1-4.
In internet radio mode:
1. Tune your radio to the Internet station that you wish to preset.
2. Long press the one-touch button (1-4) on the top of your radio, that you would like to
store the Internet station to. A folder icon will appear in the top line of the display to
confirm that the preset has been stored.
Note: If there is already an existing Internet station stored under a preset, it will be over
written when you store the new station.
Recall a stored one-touch preset 1-4.
In internet radio mode:
1. Short press the one touch button on the top of your radio (1-4), where the station you
would like to listen to has been stored.
2. Your radio will connect to that station and begin to play.
Note: If no Internet station has been stored under the preset button, the number of the
preset store will be displayed, followed by the preset list and 'empty' next to that location.
Storing Internet station presets 1-250
Note: When you store a radio station to Preset location 1-4 using this method, this will also
be saved under the 1-4 one-touch buttons on the top of your radio.
1. Tune your radio to the Internet station that you wish to preset.
2. Long press the Preset button. Your radio will place the station to be stored in the next
available preset location and the preset list will be displayed.
3. Whilst the preset list is displayed, press the Navigation/Select rotary to confirm the
preset location; or you can use the Navigation/Select rotary control to move the station
to a different numbered location and then press the Navigation/Select rotary to confirm
the preset store.
4. A folder icon will appear in the top line of the display to confirm that the preset has
been stored.
12

Publicidad

Tabla de contenido
loading

Tabla de contenido