Lenco DIR-70 BK Manual De Usuario página 9

Note: You must enter the letters and numbers of your wireless password or encryption key
exactly, as they appear on your router or router documentation, including upper or lower
case letters, to enable your radio to connect successfully to your router.
8. Use the button to move one space to the right to enter the next letter or number.
Use the Navigation/Select rotary control to display the second letter or number of your
password.
9. Continue to use the
letters and numbers of your password or encryption key have been entered correctly.
10. Please check it carefully. If you need to go back and make a correction, please use the
button and then re-enter the letters and numbers as above.
11. Once you are sure that you have entered the password or encryption exactly as it
appears n your router. Press the left hand Navigation/Select rotary to confirm.
12. 'Connecting to Network...' will be displayed. Please wait.
13. The main menu screen is then displayed with Internet Radio as the first option. You are
now connected via your router to the internet.
14. Press the left hand Navigation/Select rotary control to select Internet radio. You can
now use the left hand Navigation/Select rotary control to scroll through the options
available and press to Select.
Connect to a Bluetooth device
Check that your radio is in Bluetooth mode. If you are not already in Bluetooth mode, short
press the Mode button until you are in Bluetooth mode (check the display). Your radio will
begin to search for Bluetooth devices.
In Bluetooth Mode:
1. Your radio will search for Bluetooth devices.
2. On the device
iPhone/iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity
and ensure that it is 'discoverable'.
Note: If necessary, refer to the instructions for your radio to add or set up Bluetooth.
3. Select to 'Add new device', if necessary.
Note: Some products will automatically search for a new device and so the 'Add new device'
option is not available.
4. When found, your radio will be displayed as 'LENCO DIR-70'. Select the device name to
begin pairing.
5. When pairing is complete 'Bluetooth Connected' will be displayed.
button and the Navigation/Select rotary control until all the
that you would
9
like to connect to your radio (e.g.