Human Touch GRAVIS ZG CHAIR Manual De Instrucciones página 3

5
REMOVE THE ARMRESTS
1. Locate the armrest release knob on the underside of the armrest.
2. While pulling the lever, push the armrest toward the rear of the chair to unlock it.
3. Remove the armrest from the chair.
Armrest
4
Release lever
INSTALLING THE NEW PAD SET
1
INSTALL THE LOWER BODY PAD
1. Use the controller button to recline the chair
into the zero-gravity position.
2. Lay the body pad on top of the chair base.
Body pad
3. Slide the flap on the underside of the legrest portion of the pad over the chair frame then pull the pad
firmly toward the headrest as far as it will go. Press upward on the flaps on the underside of the pad
corners to secure the pad to the chair frame using the hook-and-loop fasteners.
Legrest
Backrest
Push up to secure
5