Human Touch GRAVIS ZG CHAIR Manual De Instrucciones página 4

4. Flip the backrest portion of the pad forward onto the legrest
far enough to expose the canvas pocket.
2
CONNECT THE HOSES AND CABLES
1. Unzip the canvas pocket, then thread the air hoses and the two white cables through the hole in
the chair canvas.
2. Connect the air hoses, then connect the two cable connectors, making sure the cabling is all
positioned behind the seat springs.
Air hoses
6
Pad
Legrest
Canvas pocket
Connectors
3
INSTALL THE UPPER BODY PAD
1. Smooth the lower body pad down over the legrest and seat, unzip the backrest panels, then flip
them to each side, out of the way.
Legrest
Backrest
Unzip backrest panels
Backrest
2. Open the inner zipper, then slide the top of the body
pad over the headrest frame.
3. Use the remote Back
4. Close the inner zipper, then close the outer zipper.
Open the inner zipper
button to raise the backrest to the upright position.
Close outer zipper
Body pad
7