Danby DAC180EB3WDB-RF Manual Del Propietário página 10

INSTALLATION INSTRUCTIONS
"L" and "U" Shaped Channel Brackets
1. Attach the foam insert to the top of the cabinet
above the screw holes. Install the "L" shaped
mounting bracket to the top of the cabinet
and the "U" shaped channels to the sides of
the cabinet using the 5/16" (8 mm) hex-head
screws provided.
2. Slide the side curtains into the channels created
by the "L" and "U" shaped brackets on both
sides of the cabinet.
3. Open the window and mark the center of the
window sill. Place the cabinet in the window
with the lower "U" channel fi rmly seated
over the edge of the window sill. Close the
window over the top of the cabinet behind the
"L" shaped bracket to hold the cabinet in the
window. Shift the cabinet to the left or right as
required to line up the center of the cabinet with
the center of the window sill. Fasten the cabinet
to the window sill using the 3/4" (19 mm) hex-
head screws provided.
1
2
3
9