Danby DAC180EB3WDB-RF Manual Del Propietário página 12

INSTALLATION INSTRUCTIONS
Extend the Window Filler Panels
1. Raise the window to expose the fi ller panel
locking screws. Loosen the screws so that the
fi ller panels slide easily. Extend the panels to fi ll
the window completely. Use two 7/16" (11 mm)
locking screws and fl at washers to secure the
fi ller panels and then close the window.
2. Secure the cabinet to the top window frame
using one 1/2" (13 mm) hex-head screw.
3. Secure the window fi ller panels to the top
window sill using two 1/2" (13 mm) hex-head
screws. Attach the frame locks to the window sill
using two 3/4" (19 mm) screws.
4. For vinyl windows, place two safety locks into
the holes located in the bottom of the cabinet
and secure with two 1/4" (8 mm) screws.
Window Lock and Sash Seal
Place the adhesive foam seal into the opening
between the inside and outside windows and
attached the safety lock to the outside window frame
using two 1/2" (13 mm) screws.
1
2
3
4
11