Kohler K-527 Guia De Instalacion página 7

Apply grease
in both ends.
Coupler
Connect
the cables.
3. Install the Interface
Apply grease (provided) into both ends of the coupler.
Connect the cable from the wall and the interface to the coupler.
Ensure the cables fully click into the coupler.
Feed the cable and coupler into the hole in the wall. Ensure a
drip loop is made.
Hook the top of the interface onto the mounting bracket, then
press the bottom until it clicks in place.
Kohler Co.
Hook onto
the bracket.
7
Press to
click in place.
1143086-2-E