Preparation; Installing The Charger; Charging The Batteries; Removing The Sticker From The Knife Head - Heiniger S tyle Mini (OT 11) Manual De Usario

Preparation

P reparation
Ins talling the c harger
1. Place the power cable such that nobody stumbles over it.
2. Keep the cables away from hot surfaces.
a
C harging the batteries
This device includes a modern NiMH-battery featuring an especially high
capacity with low weight.
It does not have any "Memory effect" and has longer durability if handled
properly.
The device is not ready for battery operation at the time of delivery.
Charge the device for 2 hours before using it for the first time. Thereafter the
normal charging time is 1 hour.
1. Check conformability between the mains voltage on the nameplate of the
plug-in power supply unit [4] and the available current.
2. Insert the plug-in power supply unit into the socket.
3. Move the On/Off sliding switch [6] to position 0.
4. Pull out the comb attachment [3] from the device.
5. Place the device in the charger [10].
The LED charge level indicator [8] displays the charging status:
22
Notic e
L E D
Blinking
Glowing
R emoving the s tic ker from the knife head
Pull out the sticker on the underside of the knife head before using it for the
first time. On this sticker, you can see whether the knife head can be folded
without using tools.
C harging s tatus
Charging.
Charging is complete.