Setting The Date And Time - HEB inControl Premium BP3NQ1 4BHEB Manual Del Usuario

4.2. Setting the date and time

1. After the new batteries are activated, the year num-
ber flashes in the display. You can advance the year
by pressing the "M" button. To confirm and then set
the month, press the time button.
2. You can now set the month using the "M" button. To
confirm and then set the day, press the time button.
3. Please follow the instructions above to set the day,
hour and minutes.
4. Once you have set the last minute and pressed the
time button, the date and time are set and the time
is displayed.
5. If you want to change the date and time, press and
hold the time button down for approx. 3 seconds or
until the year starts flashing. Now you can enter the
new values as described above.
14
Memory
Button
Time/Date
Button
TIME PM