ghd Jemella HE001 Instrucciones página 5

EN
Not to be reproduced
7
The upper switch on the
back of the handle is for
temperature setting:
= Maximum heat
= Medium heat
= Cold air
The lower switch on the
back of the handle is to
set the fan speed:
= Max Speed
= Medium Speed
Off = Off
Any temperature and speed
setting can be combined.
The Ionic Technology
function is always on.
Cool Shot Button: The
Cool Shot Button can be
switched on at any setting.
It's ideal to fix your style
and shape your look.
Nozzles: A concentrator
nozzle can be used to
achieve better styling control
through concentrating the
air flow.
Note: The fit of a cold nozzle
can be tight, particularly
when the dryer and nozzle
are new.
user maintenance instructions -
cleaning your ghd hairdryer
1. To ensure that your ghd hairdryer operates at the optimum efficiency,
always ensure that the rear filter is kept clean by regularly cleaning it.
Damage caused by failure to comply with these cleaning instructions
is not covered by the manufacturer's guarantee.
2. To do this first unplug the hairdryer from the mains power supply.
3. Never immerse the appliance in water.
4. Do not use a steam cleaner.
5. Wipe the outside of the ghd hairdryer with a damp cloth.
Do not use sharp or abrasive detergents or corrosive products.
6. Always use the ghd hairdryer with the genuine ghd filter.
7. Never operate the ghd hairdryer without a filter attached.
Rotate the ring with the air inlet
filter counterclockwise and then
remove.
Push out metal filter from rear
housing. Rinse and dry the filter
or take a soft brush and gently
remove any dust and hair from it.
After cleaning the filter, re-attach
and secure by rotating clockwise.
8