HoMedics Seville Manual De Instrucciones E Información De Garantía página 4

3.Assemble Ottoman
• Unfold the ottoman legs H as shown in
Figure 5.
• Making sure to line up the marked corners
(1, 2, 3, 4),place the ottoman top frame
I on top of the legs H assembly will
be easier if you turn the ottoman on its
side as shown in Figure 5.
• Secure with 4 small bolts D in
locations 1, 2, 3 and 4 using the allen
wrench F . See Figure 5.
TIP: Do not fully tighten any bolt until
you have lined up and partially tightened
all 4 bolts.
• Make sure all bolts are fully tightened.
• Attach the ottoman cushion J as shown
in Figure 6. For proper fit, make sure
the adhesive strips are lined up.
4.Connect Power Source
• Locate the output jack behind the
Seville chair in the lower right hand
corner of the chair back (if viewed from
behind). The input jack will be found
along the side of the chair cushion near
the control panel. Making sure to line
up the arrows, firmly insert the input
jack into the output jack to connect the
massage mechanism with the control
panel. See Figure 7.
TIP: You may wish to thread the input
jack just inside the edge of the chair
back frame before connecting it so that
the cords are less visible.
Figure 5
1
4
H
Figure 6
I
H
Figure 7
6
Power Adapter Instructions
2 Connect the Adapter jack to the massage
chair power receptacle located along the
right side of the chair. Once inserted, plug the
other end into an AC power outlet. Use only
the AC power Adapter provided with this unit.
3
AC Power Adapter
Information
Your massage chair is powered by an
attached custom AC home Adapter. Use
only the supplied AC home Adapter as
other similar-looking adapters may cause
irreparable damage to the unit and will void
your warranty.
Massage Chair and Control
J
Panel Instructions
The control panel is located along the side
of the chair cushion as shown (Figure 8).
It opens away from the chair to expose the
control buttons (Figure 9). Press the
POWER button once to activate the control
panel. The LED indicator will illuminate. To
deactivate, press again. For complete
instructions, please see page 11.
Figure 8
Figure 9
7