Ryobi TUFF SUCKER P710 Manual Del Operador página 9

TO INSTALL BATTERY PACK
See Figure 2.
 Place the battery pack in the hand vac. Align the raised
rib on the battery pack with groove in hand vac's battery
port.
 Make sure the latches on each side of the battery pack
snap in place and that the battery pack is secured in the
hand vac before beginning operation.
CAUTION:
When placing battery pack in the tool, be sure raised
rib on battery pack aligns with the bottom of the tool
and latches into place properly. Improper installa-
tion of the battery pack can cause damage to internal
components.
TO REMOVE BATTERY PACK
See Figure 2.
 Locate the latches on the side of the battery pack and
depress both sides to release the battery pack from the
hand vac.
OPERATION
9
BATTERY PACK
LATCHES
Fig. 2