Personal Security - Siefken SD4814 Instrucciones De Uso

3 YEARS
L I M I T E D WA R R A N T Y
and. When operating an outdoor power tool, use an extension cord appropriate for use out-
doors or outdoors. Using an appropriate cord outdoors reduces the risk of electric shock.
F. If the power tool is operated in a humid place, a protected supply residual current device
(RCD) must be used. Using a (RCD) reduces the risk of electric shock.

3) PERSONAL SECURITY

a) Be aware of what you are doing and use common sense when operating the power tool. Do
not use the power tool while tired or under the in uence of drugs, alcohol or medications. A
moment of distraction while operating the power tool can lead to serious injury.
b) Use personal protective equipment. Always wear eye protection. The use of protective equi-
pment such as: dust masks, non-slip safety shoes, helmets, hearing protection equipment,
worn in the right conditions will reduce personal injury.
c) Avoid unexpected starting. Make sure the switch is in the o position before connecting it
to the power source. Carrying the power tool with your ngers on the switch or powering
power tools with the switch turned on can cause accidents.
d) Remove any spanners or spanners before turning on the power tool. Attaching a wrench to
a rotating part of the power tool can lead to personal injury.
e) Do not stretch or overreach. Maintain posture and balance at all times. This allows for better
control over the power tool in unexpected situations.
f ) Wear suitable clothing. Do not wear loose clothing or jewelry. Keep your hair, clothing, and
gloves away from moving parts. Loose clothing, jewelry, or long hair can be caught by moving
parts.
g) If devices are provided for connecting dust extraction and collection, make sure they are
connected and properly used. Using these devices can reduce dust related hazards.
3