After Ironing - Philips Azur GC4043 Manual Del Usario

Repeat the calc-cleaning process if the iron still contains a lot of
impurities.
After calc-cleaning
- Plug in the iron to let the soleplate dry up.
- Unplug the iron when the amber pilot light has gone out.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down before you store it.

After ironing

1 Remove the mains plug from the wall socket and let the iron
cool down.
2 Wipe flakes and any other deposits off the soleplate with a
damp cloth and a non-abrasive (liquid) cleaner.
3 Clean the upper part of the iron with a damp cloth.
C
4 Regularly rinse the water tank with water. Empty the water
tank after cleaning.
Storage
1 Remove the mains plug from the wall socket and set the steam
control to position 0.
2 Empty the water tank.
C
3 Type GC4038, GC4035, GC4033, GC4030, GC4023, GC4020,
GC4018, GC4015, GC4013, GC4010, GC4005.
a) Let the iron cool down.Wind the mains cord around the cord
storage facility and fix it with the cord clip.Type GC4040 comes with
a 3m cord.
b) Always store the emptied iron horizontally on a stable surface and
use a cloth to protect the soleplate.
C
4 Protective storage cover ( Type GC4043, GC4040, GC4028,
GC4025).
a) Put the protective storage cover on the iron.
Do not use the protective storage cover during ironing.
b) Wind the mains cord around the cord storage facility.
c) Store the iron with the protective storage cover horizontally on a
stable surface.
ENGLISH
9