PEERLESS ALU006009-AB Instalación Y Montaje página 4

Recommended Cleaning Guidelines
The following procedures are not guaranteed to control infection. An infection control administrator or
epidemiologist should be consulted regarding cleaning procedures and processes.
Most painted components will withstand cleaning by commonly used, diluted, non-abrasive solutions
such as quaternary ammonia compounds, ammonia enzyme cleaners, and bleach or alcohol
solutions. However, it is recommended that any surface be tested in an inconspicuous area prior to
determine the propensity for discoloration.
• Pen or permanent and dry erase markers can be removed with 91% isopropyl alcohol and a soft
cloth.
• Iodine stains can be removed with commonly used cleaners and a soft cloth.
• Never use steel wool or other abrasive materials that will damage the surface fi nish.
• Do not use Acetone, mineral spirits, abrasive cleansers, paint thinner or any other harsh or toxic
chemicals to clean your product. These solvents will damage the surface fi nish.
WARNING
• To avoid risk of electric shock, do not expose
electrical components to water, cleaning
solutions or other potentially corrosive liquids
or substances.
• Do not use fl ammable cleaners on product
surfaces due to close proximity of electrical
power and equipment.
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
www.peerlessmounts.com
4 of 12
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered
ISSUED: 10-26-11 SHEET NO: 154-9015-1
trademarks of their respective owners.