The powered EWH
does not heat water.
There is no backlight
of control lamps.
The abovementioned malfunctions are not defects of the EWH and shall be eliminated by the
customer themselves or by a specialized organization at the customer's expense.
Where impossible to eliminate the malfunction using the above recommendations or in case of any
other problems, contact the service center specified in the user manual.
Transportation and storage of electric water heaters
Electric water heaters shall be transported and stored in accordance with the handling symbols
shown on the package:
1.
2.
1. The need to protect the cargo from moisture;
2. Frailty of the cargo, condition of careful handling;
3. Recommended temperature range for cargo storage: from +10°С to +20°С;
4. Correct vertical position of the cargo;
The thermoswitch was
triggered or is not switched on
The mains cable is damaged
Fig. 2
3.
4.
Disconnect the EWH from the
power supply network, remove
the protective cover, press the
thermal switch button until it is
secure, install the cover and
switch on the power supply (Fig. 2)
Contact the service center
Push
EN
21