Remington AS404 Manual Del Usuario página 4

Ocultar thumbs Ver también para AS404:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
ENGLISH
F INSTRUCTIONS FOR USE
1
Wash and condition your hair as normal.
2
Squeeze out excess moisture with a towel and comb through.
Hairsprays contain flammable material – do not use while using this
,
product.
3
Select your attachment before you turn on the appliance.
4
Attachments can be connected to the power handle by unscrewing the
attachment cap (6), sliding the brush onto the inner support and securing
by screwing back on the attachment cap.
5
Plug the product into the mains power supply.
6
To turn the product on slide the speed/heat setting switch to position 'I'
7
Dry roots completely and dry length 90% dry, ready for styling.
8
Section the hair prior to styling. Style the lower layers first.
9
The 25mm thermal bristle brush adds volume to your roots. It can also
create looser curls and waves.
10 The 19mm round brush creates small curls and flicks to short and medium
layered hair.
11
Select the desired temperature and speed setting using the switch on the
handle.
12
To increase the setting slide the heat/speed setting switch to position 'II'
13
For all brush attachments: Take a section of hair and place the ends around
the brush. Rotate the styler allowing the hair to wrap around the barrel of
the brush drying and styling as you go.
14 To release the hair when curled around the brush attachments press the curl
release button to allow the brush to rotate freely.
15 Allow the hair to cool before styling.
16 Let the attachments cool before removing.
17
To remove the attachments unscrew the attachment cap and slide off the
inner support.
18 To turn the appliance off slide the heat/speed setting switch to the '0'
position.
19 After use, turn the appliance off and unplug.
20 Let the appliance cool down before cleaning and storing away.
C CLEANING AND MAINTENANCE
Unplug the appliance and allow to cool.
To maintain peak product performance and to prolong motor life, it is
important to regularly remove any dust and dirt from the air filter grille and
clean with a soft brush.
Don't use harsh or abrasive cleaning agents or solvents.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido