MARTINS Industries MFJ-2T Manual página 4

SAFETY
Inspect before each use. Do not use if broken, bent, cracked or damaged parts (including labels) are noted.
Do not modify or use this product for any other application than what it has been designed for.
Lifting device only, always use Jack Stands to support the vehicule before working.
ASSEMBLY
STEPS
1
Assemble the 2 parts of
the lifting arm together.
BEFORE using this product, read this manual and follow all its Safety and Operating instructions.
Failure to do so may result in personal injury and/or property damage.
Retain these instructions for future reference.
2
Insert into the lift arm socket and
tighten the bolt to lock the lifting
arm in place.
3
Prior to operating floor jack:
• Turn the lifting arm counterclockwise
(never turn more than 3 full turns)
• Pump the jack several times
(6 to 8 full strokes) to ensure
internal lubrification and
eliminate air from the system.
Repeat if needed.
6-8