Operation Instructions; Bulb Replacement; Temperature Selection - Danby DPF073C1WDB Guía De Utilización Y Cuidado Para El Propietario

Refrigerador libre de escarcha parcial
Ocultar thumbs Ver también para DPF073C1WDB:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions
FEATURES
1. Freezer Shelf
2. Freezer Door
3. Thermostat Control
4. Refrigerator Shelves
5. Crisper Cover
6. Crisper
7. Leveling Legs
8. Egg Tray
9. Refrigerator Door Bin
10. Lower Door Bin

BULB REPLACEMENT

Unplug the AC power cord from the wall.
Remove the screw that holds the light bulb cover.
Squeeze the tabs at the top and bottom of the light bulb cover simultaneously.
Remove the light bulb cover.
Make sure the light bulb is cool before removing.
Unscrew the bulb
Replace with a 10 watt bulb that is the same shape and size.
Replace the light bulb cover.

TEMPERATURE SELECTION

The fi rst time you turn the unit on, set the temperature control to "7," the coolest
setting.
The range of temperature controls are from position "OFF," or NO COOLING to "7,"
the coldest. After 24 hours, adjust the temperature control to the setting that best
suits your needs. The setting of "4" should be suffi cient for home or offi ce refriger-
ator use.
Note:
If the unit is unplugged, has lost power, or has been turned off, you must wait 3 to
5 minutes before restarting the unit. If you attempt to restart before this time delay,
the refrigerator will not start.
Turning the refrigerator temperature control to the "OFF" position stops the cooling
cycle but does not shut off the power to the unit.
1
3
4
5
6
7
5
2
8
9
10
1
7

Publicidad

Tabla de contenido
loading

Tabla de contenido