Operations; Tuning; Automatic Tuning; Manual Tuning - Yamaha T-S500 Manual De Instrucciones

OPERATIONS

Automatic tuning

Automatic tuning is effective when station signals are
strong and there is no interference.
1
Press FM/AM repeatedly to select the
reception band (FM/AM).
2
Press TUNING MODE to select "Auto tune".
p Auto tune [
FM 87.50MHz
3
Turn PRESET/TUNING to begin automatic

tuning.

When this unit is tuned into a station, the TUNED
indicator lights up and the frequency of the station is
shown on the front panel display.
FM 94.90MHz

Manual tuning

If the signal from the station you want to select is weak,
tune into it manually.
1
Press FM/AM repeatedly to select the
reception band (FM/AM).
2
Press TUNING MODE repeatedly to select
"Manual tune".
pManual tune[
FM 87.50MHz
3
Turn PRESET/TUNING to select the desired
frequency.
When this unit is tuned into a station, the TUNED
indicator lights up.
4
En
TUNING

Selecting preset stations

You can tune into any desired station simply by selecting
the preset station number.
Note
See the next page to preset stations.
1
Press TUNING MODE repeatedly to select
"Preset tune".
2
Turn PRESET/TUNING to select the desired
preset station number.
Australia model
■ Improving FM reception
If the signal from the station is weak and the sound quality
is not good, set the FM radio wave reception mode to the
monaural tuning mode to improve reception.
Press FM MODE repeatedly to select "AUTO
STEREO" (stereo mode) or "MONO" (monaural
Australia model
mode) when this unit is tuned into an FM radio
station.
• When this unit is in the stereo tuning mode, the
STEREO indicator lights up on the front panel display.
• When this unit is in the monaural tuning mode, the
STEREO indicator goes off.
Note
Even if this unit is in the stereo tuning mode, the STEREO
indicator does not light up when the current program is monaural.
Australia model