Charging The Battery - SPC DARK GLOW 10.1 Manual De Usuario

CHARGING THE BATTERY

The device has an internal battery. You have to charge
it before starting to use it, connecting the device to the
battery charger included in the box.
With the device switched off, connect one end of the
USB cable in the battery charger and the other end to the
device's connector (6). The battery will start to be charging.
Charge the battery during around 5 hours to ensure a
maximum usage time and to lengthen its useful life.
NOTE: If the battery is TOO discharged, it's possible that the device
needs some minutes to start charging. If you don't see anything
in the display it's possible that it is too discharged. Wait some
minutes until the charging process starts.
Do not forget to charge the device before the first use and when the
battery icon is empty.
CONNECTION TO THE COMPUTER
With the device switched on, connect it to a computer
with the USB cable of the box. The computer will
automatically recognise the device.
All manuals and user guides at all-guides.com
26
You will see a notification on the top left of the screen.
Automatically tablet will be recognized by the computer.
Once the computer has detected the device, it will operate
like a portable disk. Therefore, file transfer will be carried
out in the same way as with any other storage device
(for example, selecting and dropping files to the unit, or
copying and pasting files in the unit).
NOTE: Do not disconnect the player during the data copying or
deleting process as this could cause the unit to malfunction and
damage the software.
Do not copy files or folders with file names too long or strange
characters, because it may cause a wrong performance of the
device. If so, change the name of the files or folders.
MEMORY CARD AND USB DEVICE
INSTALLATION
Insert the microSD memory card (up to 32GB) in the
microSD card slot (8) with the contacts of the card inside,
and looking at the back. Press until it is fully contained
inside the device and you hear a click. To extract the card,
press it slightly inwards until you hear a click. The card will
pop out of the slot, then you can remove it.
27
EN