Calibrating The Battery - BIRD 5000-XT Libro De Instrucciones

Digital Power Meter Model 5000-XT
1. Shut down the 5000-XT.
2. Insert a charged battery pack.
3. Turn on the 5000-XT.
When No Power Source is Available —
condition when no power source is available:

Log trace
XT (see "Shutting Down" on page
When the 5000-XT Cannot Restore from Shutdown —
battery condition when the DPM lacks the power to restore from sleep mode:
1. Do one of the following:

Insert a charged battery
page 49).

Plug the computer into an external power source
Batteries" on page

Calibrating the Battery

Note: Even if a battery pack is heavily used, it should not be nec-
essary to calibrate it more than once a month.
Note: It is not necessary to calibrate a new battery pack.
Note: Calibrate a battery pack under the following conditions:

When battery charge displays seem inaccurate

When there is a significant change in battery run time

When the battery has been unused for one month or more
1. Charge the battery.
2. Discharge the battery fully through normal use.
3. Recharge the battery.
48
See "Shutting Down" on page
(see "Logging Menu" on page
(see "Battery Replacement" on
46).
See "Charging Batteries" on page
See "Charging Batteries" on page
To resolve a low-battery
44) and turn off the 5000-
11).
(see "Charging
11.
To resolve a low-
46.
46.