Advanced Functions - Beninca IRI.KPAD Guía Rápida

4. Enter the Administrator PIN to memorize followed by #.
5. The alarm emits 3 beeps to confirm memorization.

4) ADVANCED FUNCTIONS

Some of the device's advanced functions are described below.
Administrator PIN
User PIN
USER PIN
"User PIN" means a PIN connected to an already existing "Administrator PIN" in the
keypad, and of which it assumes the functionality.
The utility of creating one or more "User PINs" connected to an "Administrator PIN"
is to allow hierarchical access management.
For example, in the case of a residential building installation in which several users
access a common gate, the installer can store a single "Administrator PIN" in the
keypad and associate it to the gate receiver. Then a "User PIN" can be created for
each tenant of the residential building and they can all be associated to the same
"Administrator PIN". The advantage is that the association between the keypad and
the receiver should be made only for the "Administrator PIN" (therefore only once)
and furthermore you can decide whether to disable individual "User PINs" to block
the access of specific users, or to add new ones in the case of new users, always
without accessing the receiver.
On the last page of this manual is a table that can be used as a model for reference
to the codes used (recommended in the case of complex installations).
26
Generates the
transmission of a radio
code 433MHz
(ARC, HCS or fix)
It does not generate a new
radio code but transmits the
radio code associated with
the Admin PIN to which I
have added the User PIN.
It is stored in the receiver and
occupies a place in the memory
(as if it were a radio remote
control for a channel)
For the receiver, it is as if the
Admin PIN has been entered, it
sees the same radio code and
recognizes it as such.