Accessing Airos Via Wi-Fi - Ubiquiti Networks NanoStation AC OCO Guia De Inicio Rapido

Accessing airOS via Wi‑Fi
Verify connectivity in the airOS® Configuration Interface.
There are two methods, the UNMS
are available for 15 minutes immediately after you power on
the NanoStation loco. If necessary, you can power cycle the
NanoStation loco to re‑enable its Wi‑Fi.
Proceed to the appropriate instructions:
UNMS App
1. Download the UNMS app from the App Store® (iOS) or
Google Play
2. Connect your device's Wi‑Fi to the NanoStation loco SSID
named: Loco5AC:<MAC Address>
Note:
Wi‑Fi adapter.
3. Launch the app.
4. Tap the NanoStation loco on the Connections screen.
(Android).
™
Ensure that DHCP is enabled on your
Connections
Available
NanoStation 5AC loco
192.168.172.1
Loco5AC: F09FC12EXXXX
Connections
app and Web Portal. Both
™
8 : 08
100 %
Install Settings