Accessing airOS via Wi-Fi
Verify connectivity in the airOS® Configuration Interface.
There are two methods, the UNMS
are available for 15 minutes immediately after you power on
the device. If necessary, you can power cycle the Bullet AC to
re-enable its Wi-Fi.
Proceed to the appropriate instructions:
UNMS App
1. Download the UNMS app from the App Store® (iOS) or
Google Play
2. Connect your device's Wi-Fi to the Bullet AC SSID named:
BulletAC-IP67:<MAC Address>
Note:
Wi‑Fi adapter.
3. Launch the app.
4. Tap the Bullet AC on the Connections screen.
(Android).
™
Ensure that DHCP is enabled on your
Bullet AC IP67
192.168.172.1
BulletAC-IP67
App and Web Portal. Both
™
:F08FC2552018