Maintenance Instructions - HoMedics BubbleBliss Manual De Instrucciones E Información De Garantía

Bubble Bliss Features
• Rejuvenating bubbles provide a relaxing massage
• Heat helps maintain water temperature
• Raised nodes in floor reinvigorate feet
• Splash guard with foot rest; convenient for pedicures
Operating Instructions
1. E nsure that the unit is unplugged before filling with water. Fill with warm
water to the fill line located on the inside of the tub (Fig 1).
NOTE: Heat will only help to maintain the temperature of water placed
inside the footbath. It will not heat cold water. For a warm water massage,
fill the unit with warm water.
2. Plug the unit into a 120 volt household outlet.
3. P ress power button once to turn on bubbles and heat (Fig 1).
4. While seated, place your feet in the spa.
5. Enjoy a deep soothing massage by sliding feet back and forth over the
raised nodes on the footbath floor.
6. When finished, depress power button once.
7. To empty: First, unplug the unit. Tip the unit, allowing water to pour out
along the drain spout. DO NOT pour water over the power button (Fig 1).
6
Caution:

Maintenance Instructions

To avoid injury
To Clean
and irreparable
Unplug the unit and allow it to cool before cleaning. Clean only
with a soft, damp cloth and mild cleansing agent.
damage, always
remain seated
• After cleaning, wipe surfaces with a dry cloth.
when using this
• Never use strong abrasives, detergents or cleansing agents.
footbath. Never
• Periodically straighten cord if it becomes twisted.
stand on or in
To Store
the unit.
Unplug the appliance from the outlet and allow to cool and dry.
CAUTION: THIS
• Store in its box or a clean, dry place.
UNIT CAN ONLY
• To avoid breakage, do not wrap the power cord around the unit.
RUN WITH
• Do not hang the unit by the power cord.
WATER IN IT.
• This appliance is designed for household use only.
DO NOT USE
Figure 1
WITHOUT
WATER.
Drain Spout
CAUTION:
DO NOT FILL WATER OVER THE FILL LINE
Fill Line
Power Button
7