Maintenance - AIR8 1200i PRO Manual Del Usuario

Maintenance

When replacing the HEPA filter, the Carbon filter should be brushed to remove the dust.
For a better maintenance, check carefully whether the device, circulating air flow, filters,
digital control panel, etc. are working properly.
If the machine is not in use for a long period of time, it should be unplugged and stored
with a large protective covering.
ITEM
External wiring
Fan and motor
Pre-filter
UV-GI sterilization light
This product must not be disposed of with household waste.
a recycling point for electronic and electrical equipment.
HOW TO CHECK IT?
Visually inspect the cable and plug. If the fuse
has blown, the plug or power cord heats up or
appears to be damaged, turn off the device and
immediately contact our AIR8 specialists.
The fan must rotate smoothly and without
generating unusual noise. If unusual noise is
heard, check if there is an external element in
the ventilator. If the motor generates unusual
noise, please contact our AIR8 specialists.
Make sure the surface is not damaged.
Pre-filter has to be cleaned every 3 months.
When replacing the HEPA filter, the light tube
has to be visually inspected.
FREQUENCY
This air purifier must be disposed of at
3 months
12 months
3 months
6 months
13