BURNHARD FLINT Manual Del Usuario página 42

INSERTING THE GRILLING GRID BRACKET TOP,
HEAT CONDUCTION SHEET AND GREASE REMOVAL SHEET
19
Attach the grill bracket inside the grill
chamber.
21
Insert the grease removal sheet into
the mounting on the side of the grilling
chamber, above the heat conduction
sheet.
Make sure that the rail points down-
wards and that the sheet is located
directly underneath the hole for grea-
se removal. The sheet should now tilt
slightly to the right.
20
Insert the heat conduction sheet with
the rails into the mounting on the front
and back side of the grilling chamber.
42