Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How to use your Braun No touch & touch forehead
Note: The thermometer and individual should be in the same ambient temperature for at
least 10 minutes.
Remove protective cap
1
Power on
2
Press and release the power button once . Backlight will come
on and the start-up sequence will begin .
NOTE: Make sure to remove the protective scanner cap
before taking a measurement .
Select age range
3
Select age with Age Precision button .
Device will start cycling through the age ranges, highlighting the 3 ranges you may
select; 0-3 months (
), 3-36 months (
Press the Age Precision button to toggle through the age ranges until you select
the age appropriate for the individual .
3.1 To set a preferred age range: (Locking an age setting)
To save a preferred age range, so that the preferred age range will be automatically
selected when the thermometer is turned ON, follow these steps:
A . Make sure the thermometer is OFF .
B . Press and hold the power button (
seconds . The unit will turn on, displaying a yellow backlight and the 3 age range
icons will flash .
C . Press the Age Precision (
Age Precision button until your desired age range is flashing on the display .
D . Once the desired age range is selected, stop pressing the button and wait 3
seconds . The green backlight will illuminate, and the selected age range will turn
solid . After 4 seconds, the thermometer will turn off .
E . The preferred age range will be automatically selected when the thermometer
is turned ON .
6
), or 36+ months (
) and Age Precision button (
) button . The age range selected will flash . Press the
) .
) for 4
Publicidad
Tabla de contenido
