Kobalt KBB 6540-06 Manual Del Usuario página 11

ASSEMBLY INSTRUCTIONS
ASSEMBLING THE CONNECTION TUBE
1. Align the raised ribs (F) with the slot (G).
2. Insert the shorter end of the connection tube (B)
into the flex tube (G) at a slight angle.
3. Use one end of the tube as a pivot point, and press
the other side into the flex tube. This may require
some force.
4. Place the hose clamp (CC) around the flex tube.
5. Insert and tighten the short screw (AA) into the hose
clamp (CC).
B
AA
11
E H
G
F
CC
CC