Belkin P74106ea Instructivo página 5

P74106ea_F5U503ea_Manual.qxd
Hardware Installation
4. Remove the FireWire card from its protective static bag.
Handle it by the metal bracket only, and do not touch the
gold edge connectors. Insert the card into the PCI slot,
carefully aligning the rear bracket to the computer case.
Make sure that the gold fingers are fully inserted into the slot.
11/4/04 2:32 PM Page 4
(continued)
4
Hardware Installation
5. Fasten the card
securely using the
screw that was
used to hold
the rear bracket.
6. (Optional) If you are planning to connect multiple bus
powered FireWire devices to the Belkin IEEE 1394
PCI card, it may be necessary to draw auxiliary power from
your computers power supply. This is accomplished by
connecting a spare disk drive power cable to the power
connector on the PCI card.
5
(continued)
En