Unpacking The Product - Joovy Toy Booster Seat 012 Manual De Instrucciones

EN FR ES
Please read these instructions carefully before use and keep them for future reference.
• This product is a TOY booster seat for dolls or stuffed toys ONLY.
• NEVER use this toy to carry a baby or child for any purpose whatsoever.
• NEVER use this toy to hold a baby or child in a vehicle. Death or serious injury may occur.
• NEVER leave the booster unsecured in a vehicle. An unsecured booster can be thrown around and may injure you
or your child in a sharp turn, sudden stop or accident.
• Discard this product if it is ever involved in an actual vehicle accident.
• The maximum weight that can be carried in the booster is 7 lbs. (3.2 kg).
• Discard all packaging materials properly. Do not allow children to play with them.
Although this is a TOY and must NEVER be used for a baby or child, other warnings are provided throughout this
manual to promote your child's safe use of this product for their doll or stuffed toy. For your child's understanding of
the safe use of this product, please read and adhere to these warnings and insure that your child also understands
If you experience any difficulty with the assembly or use of this product, or if you have a question regarding these
UNITED STATES – Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
CANADA – Elfe Juvenile Products: (800) 667-8184, Hours 8:30 am – 5:00 pm Eastern Time.
Assembling and Using your Doll/Stuffed Toy Booster Seat
To insure safe operation of your booster, please follow these instructions carefully.

1 Unpacking the Product

• Carefully remove booster from the box and plastic bag.
• Discard all packaging materials properly. Do not allow children to play with them.
2 Positioning the Shoulder Straps
• Place doll or stuffed toy into booster.
• Determine which pair of shoulder harness slots is even with or just above the doll's shoulders. They will not hold the doll securely in a
sudden stop or crash.
• If the shoulder straps need to be adjusted, remove doll from booster.
• From the back of the booster, unthread harness straps from the sliding buckle. REMEMBER the correct routing of the straps.
• Remove the straps from slots in the seat and re-route them through the desired slots, making sure they are not twisted.
• Rethread the straps through the buckle.
• Check that straps are secure by pulling on harness straps from the front.
3 Securing Doll in the Booster
• Unbuckle the harness by pressing the button in the center of the buckle. See Figure 3.1.
• Open the harness clip by pressing the button and unbuckling the clip. See Figure 3.2.
• Place the doll in the booster with the shoulder straps over its shoulders and chest. Then place the crotch strap between the doll's legs.
• Bring the seat belt around the doll's waist and insert the male end of each waist strap buckle into the female buckle. Insure that they snap
into place. See Figure 3.3. Tighten the waist belt to be snug around the doll's waist.
• Buckle the harness clip pieces together. See Figure 3.4. Position the harness clip in the middle of the doll's chest, level with the armpits
and away from the neck.
• Both the shoulder straps and the waist straps may be adjusted using the sliding buckle on these straps, located on the back of the
booster. See Figure 3.5.
NEVER use this booster to carry a baby or child for any purpose whatsoever.
DO NOT use the booster to carry any dolls or stuffed toys that weigh more than 7 lbs. (3.2 kg). As with a real booster,
this toy booster should never be placed near the edges of counter tops, tables, or other surfaces.
!
and follows them.
Please do not return this product to the store
instructions, please contact our Customer Service Department:
Please note: Styles and colors may vary.
!
WARNING
WARNING