Steren CCTV-210 Manual De Usuario página 17

SYSTEM ADMINISTRATION >> CONFIGURATION
The Confi guration window contains commands for settings that
are required to input key details to setup the camera for
operation. Click Confi guration in the top menu bar and the
Confi guration window will appear as below:
System
Click the System item in the left column to setup the basic
confi guration of your camera.
- System Setting: In this fi eld, you can confi gure the
basic information of your camera.
• Camera Name: This fi eld is used to enter a
descriptive name for the device. The default
setting for the Camera Name is CS-xxxxxx,
where xxxxxx is the last six digit of the MAC
Address. The maximum length is 32 (printable
ASCII).
ENGLISH-17