Steren CCTV-210 Manual De Usuario página 65

E XPLUG CONTROL INSTALLATION
Installation To Web Server
1. Installation:
Copy the "xplug.ocx" fi le to any WEB Server table.
2. Setting (Confi guration):
From the Web Confi guration menu select "System" and under
the "Loading ActiveX From" input web server location (http://
www.web server location.com/).
Once the settings are completed, the user now is able to access
the Internet Camera from the web browser by selecting the
image view – ActiveX mode.
Important Information Important Information
It is highly recommended to install the Xplug Control It is highly recommended to install the Xplug Control
application to the Web Server for IE 5.0. It must be installed application to the Web Server for IE 5.0. It must be installed
to a Public Domain with Fixed IP address. to a Public Domain with Fixed IP address.
Installation To Local PC
Insert the CD-ROM into the CD-ROM drive to initiate the autorun
program. Once completed.
To install Xplug Control, click the "Xplug Control" button to
activate the installation procedure for the plug-in program.
Once executed, a prompt will appear requesting the input of the
desired language selection. Make the desired selection and click
"OK" to continue.
ENGLISH-65