Medion LIFE X14351 Guía Rápida página 89

3.7.1. Network/Internet settings
NETWORK TYPE
PRESS WPS ON
YOUR WIFI
ROUTER
(only for WLAN)
INTERNET
SPEED TEST
ADVANCED
SETTINGS
NETWORKED
STANDBY MODE
 Exit the network settings by pressing
12
1
You can configure network settings to access content on your home network and the internet. Select „Next" to scan
Network Type Network Type
Press WPS on your wifi router
Internet Speed Test
Advanced Settings
Networked Standby Mode
Disconnected
MAC:
Network settings
Here you select the network type:
making a selection
NEXT
with the button, an overview of all available networks appears. Make
O K
a selection and confirm with the
network, a virtual keyboard appears which you can use to enter this with the
help of the direction buttons  and the
password, select
OK
This option enables you to quickly establish a WPS connection via a wireless
network (Wi-Fi). Hold down the WPS button on your router and confirm this
option using the
OK
Press the button in order to test the Internet speed.
O K
Press the button to call up further network configuration options.
O K
CONFIGURATION
CONFIGURATION
Activate/deactivate the Wake-On LAN/Wake-On Wireless LAN function (WoL/
WoWLAN). This enables you to switch on the smart TV via a different device
(e.g. a smartphone with the MEDION® Life Remote App). Both devices must
be connected to the same network via LAN or Wi-Fi for this purpose. Select
the setting to activate this function. The device being used as a remote
ON
control needs to be connected to the TV once when it is switched on. The
control function only works when the TV is in standby mode.
O K
2 3 4 5
Network/Internet Settings
wireless networks.
< <
WIRELESS DEVICE
with the direction buttons  and confirming
button. If a password is required for a
O K
on the keyboard and confirm with the
button. Then the WPS connection will be made.
O K
Choose the setting
you select
MANUAL IP
in which you can manually enter the data for the
ADRESS, SUBNET MASK
the direction buttons  and the number buttons.
Select here between
. If you select
DNS MANUAL DNS
appear in which you can manually enter the data
for the
DNS SERVER 1
direction buttons  and the number buttons.
.
> >
Wireless Device Wireless Device Wireless Device
On
Next
OK BACK EXIT HOME
or
WIRED DEVICE
button. After entering the
O K
O K
or
AUTOMATIC IP MANUAL IP
, three additional lines appear
and
DEFAULT GATEWAY
AUTOMATIC DNS
, two additional lines
and
DNS SERVER 2
. After
button.
. If
IP
using
or
MANUAL
using the